100m HDMI Extender Over Dual Coaxial Cables with IR

※ Product introduction

Introduction
The HDMI Over Single Coax Extender sends HDMI signals Over just one 75Ohm Coaxial cable -- up to100m away. The HDMI Over Single Coax Extender supports HDMI 1.3 and HDCP 1.1 with features such as Deep Color and 1080p.By using standard and widely available 75Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions to be easier than heavy and expensive copper cable and more robust than optical fiber. The Extender includes two units: transmitter and receiver. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The Extender offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and is the perfect solution for any application.

Features
Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable.
Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable with zero signal loss.
Single Link Range: 1080p/60, 12 bit color depth.
Compliant with HDMI 1.3, HDCP 1.1 standards.
Supports digital video formats in Deep Color Mode at up to12bits/color.
Supports PCM 48KHz audio.
Supports Cascade function in Transmitter and Receiver and it is easy to build a network system by installer.
Lip-Sync Pass Through.
Bi-directional IR system allowing for control of source or display (IR accessories included)

Specification:

Frequency Bandwidth	225MHz/link (HDMI 1.3)
In/Output Support Resolution	480i, 576i, 720p@50/59.94,60 1080i@50/59.94/60 1080p@23.98/24/25/29.97/30/50/59.94/60
Input TMDS Signal:	3.3 volts
Input DDC Signal:	5.0 volts/P-P
ESD Protection Human body model	±8kV (air-gap discharge) ±4kV (contact discharge)
Coaxial Cable Distance	Full HD up to 100M (RG-6U cables) HD up to 200M (RG-6U cables) SD up to 300M (RG-6U cables )
Dimension (mm)	100(D)x105(W)x25(H)
Weight (g)	280
Power Supply:	(2) 5V1A DC
Power consumption:	2.3 watts (TX); 2.2 watts (RX)
Operation temperature:	32~104 °F
Storage temperature:	-4 ~140 °F
Relative humidity:	20~90 % RH (no condensation)

Operation Controls and Functions
LINK LED: This LED will illuminate when the device is connected with HDMI source
HDMI IN: This slot is to connect with the input source equipment such as DVD or Blue-ray player with
connection cable for input video and audio signal transmission.
IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the
direct line-of-sight of the IR receiver.
IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR
blaster in direct line-of-sight of the equipment to be controlled.
EDID: The EDID switch allows to pre-set an EDID to encourage a “handshake” between the display
and source.

LINK LED: This LED will illuminate when the device is connected with HDMI source

HDMI IN: This slot is to connect with the input source equipment such as DVD or Blue-ray player with connection cable for input video and audio signal transmission.

IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.
EDID: The EDID switch allows to pre-set an EDID to encourage a “handshake” between the display and source.

Position	EDID Description
0 0	1080p, 2CH PCM 48KHz
0 1	1080p, 5.1CH PCM 48KHz
1 0	1080p, 7.1CH PCM 48KHz
1 1	1080i, 2CH PCM 48KHz

Prev:100m HDMI Extender Over single Coaxial Cable with IR Next:end